STYLE NA1100
Compressed Sheet Packing
Carbon Fibers / NBR Binder

CONSTRUCTION
Style NA1100 is a compressed non-asbestos sheet gasket material produced from carbon fibers and graphite, bonded with nitrile rubber (NBR). It is manufactured through the hot calender process under rigorous quality control standards that are registered under ISO-9001 certification.

APPLICATION / SERVICE
Style NA1100 is a premium grade, multi-service gasket sheet, designed to handle the extremes of pressure and temperature, and it cuts very easily and cleanly. The versatility of this sheet enables a plant to standardize on one sheet for a multitude of applications and avoid the confusion of having to choose from several different sheets. NA1100 is suitable for service handling the following general media categories:

 
 Mild inorganic acids
 Mild organic acids
 Concentrated alkalies
 Diluted alkalies
 Water
 Brine
 Saturated Steam		 Air
Industrial Gases
Animal oils
Synthetic oils
Vegetable oils
Petroleum and Derivatives
General chemicals

 

 Aliphatic solvents
Aromatic solvents
Chlorinated solvents
Oxygenated solvents
Neutral solutions
Refrigerants
 

PRODUCT DATA
Temperature Limits:  
Minimum
 -40°F (-40°C)
Maximum
 840°F (450°C)
Pressure Limits: Vacuum to 1900 psi (130 bar)
ASTM Line Call Out: ASTM F104-F712230-M6
Color: Black
Available Sheet Sizes:  
Thicknesses:
 1/64”, 1/32”, 1/16”, 3/32”, 1/8”
Sheet Sizes:
 59” x 63”
  59” x 126”
  118” x 126”

 

TYPICAL PHYSICAL PROPERTIES NA1100
ASTM
TEST METHOD 		PHYSICAL PROPERTIES VALUES
F 36 Compressibility 9%
F 36 Recovery 60%
F 38 Creep Relaxation 28%
F 146 Weight Increase After
Five Hour Immersion
 
ASTM IRM 903
@ +300°F (+150°C)
ASTM Fuel B
@ + 70-85°F (+21-29°C)
 10%

9%
F 146 Thickness Increase After
Five Hour Immersion
 
ASTM IRM 903
@ +300°F (+150°C)
ASTM Fuel B
@ + 70-85°F (+21-29°C)
 7%

7%
F 152 Tensile Strength Across Grain 2460 psi
(17 N/mm2)
- Density: 106 lb/ft3
(1.7 gm/cc)

 

Pressure x Temperature Sealability Curve

 

The P x T graph shown above indicates the service limits for this sheet considering pressure and temperature simultaneously...(Tests were performed with nitrogen on 1.6mm thick sheet). The "normal" curve represents the common usage area for this sheet while the "maximum" curve indicates the maximum limits. For applications near or above the "maximum" curve, contact TEADIT.
Properties and application parameters shown are typical and are presented in good faith but no warranty is expressed or implied. This edition supersedes all previous issues and all data is subject to change without notice. 11/96

HomeSite TermsOrdering InformationContact UsPlace Order