STYLE NA1040
Compressed Sheet Packing
Cellulose Fibers / NBR Binder
CONSTRUCTION
Style NA1040 is a compressed non-asbestos sheet gasket material produced from a combination of cellulose and other synthetic fibers and bonded with nitrile rubber (NBR). It is manufactured through the hot calender process under rigorous quality control standards that are registered under ISO-9001 certification.

APPLICATION / SERVICE
Style NA1040 is a good general service sheet, formulated to handle medium pressures and temperatures. It is recommended for use as an economical filler material for PTFE envelope gaskets. Style NA 1040 is suitable for service handling the following general media categories:

 

 Diluted alkalies
 Water
 Brine
 Air
 Animal Oils
 Vegetable Oils

 

Petroleum and Derivatives
General chemicals
Aliphatic solvents
Aromatic solvents
Neutral solutions
 
 
PRODUCT DATA
Temperature Limits:  
Minimum
-40°F (-40°C)
Maximum
410°F (210°C)
Pressure Limits: Vacuum to 500 psi (35 bar)
ASTM Line Call Out: ASTM F104-F713230-M4
Color: White
Available Sheet Sizes:  
Thicknesses:
1/64”, 1/32”, 1/16”, 3/32”, 1/8”
Sheet Sizes:
59” x 63”
  59” x 126”

 

TYPICAL PHYSICAL PROPERTIES NA1040
ASTM
TEST METHOD
PHYSICAL PROPERTIES VALUES
F 36 Compressibility 13%
F 36 Recovery 55%
F 38 Creep Relaxation 29%
F 495 Ignition Loss 27%
F 146 Weight Increase After
Five Hour Immersion
 
ASTM IRM 903
@ +300°F (+150°C)
ASTM Fuel B
@ + 70-85°F (+21-29°C)
9%

9%
F 146 Thickness Increase After
Five Hour Immersion
 
ASTM IRM 903
@ +300°F (+150°C)
ASTM Fuel B
@ + 70-85°F (+21-29°C)
7%

8%
F 152 Tensile Strength Across Grain 1160 psi
(8 N/mm2)
- Density: 112 lb/ft3
(1.8 gm/cc)

 

Pressure x Temperature Sealability Curve

 

The P x T graph shown above indicates the service limits for this sheet considering pressure and temperature simultaneously...(Tests were performed with nitrogen on 1.6mm thick sheet). The "normal" curve represents the common usage area for this sheet while the "maximum" curve indicates the maximum limits. For applications near or above the "maximum" curve, contact TEADIT.
Properties and application parameters shown are typical and are presented in good faith but no warranty is expressed or implied. This edition supersedes all previous issues and all data is subject to change without notice. 11/96

HomeSite TermsOrdering InformationContact UsPlace Order