STYLE NA1030 Compressed Sheet Packing Cellulose Fibers

CONSTRUCTION
Style NA1030 is a compressed non-asbestos sheet gasket material produced from cellulose fibers and bonded with styrene butadiene rubber (SBR). It is manufactured through the hot calender process under ISO-9001 certification.

APPLICATION / SERVICE
Style NA1030 is a good general service sheet, formulated to handle medium pressures and temperatures. It is suitable for service handling the following general media categories:

Diluted alkalies
Water
Brine

Air
General chemicals
Neutral solutions

PRODUCT DATA

Temperature Limits:

-40°F (-40°C)

410°F (210°C)

Pressure Limits:

Vacuum to 500 psi (35 bar)

ASTM Line Call Out:

ASTM F104-F712650-M4

Color:

Blue

Available Sheet Sizes:

1/64”, 1/32”, 1/16”, 3/32”, 1/8”

59” x 63”

59” x 126”

118” x 126”

TYPICAL PHYSICAL PROPERTIES NA1030

ASTM
TEST METHOD

PHYSICAL PROPERTIES

VALUES

F 36

Compressibility

10%

F 36

Recovery

60%

F 38

Creep Relaxation

30%

F 495

Ignition Loss

34%

F 146

Weight Increase After
Five Hour Immersion

22%

14%

F 146

Thickness Increase After
Five Hour Immersion

29%

22%

F 152

Tensile Strength Across Grain

1160 psi
(8 N/mm²)

Density:

112 lb/ft³
(1.8 gm/cc)

Pressure x Temperature	Sealability Curve

The P x T graph shown above indicates the service limits for this sheet considering pressure and temperature simultaneously...(Tests were performed with nitrogen on 1.6mm thick sheet). The "normal" curve represents the common usage area for this sheet while the "maximum" curve indicates the maximum limits. For applications near or above the "maximum" curve, contact TEADIT.

Properties and application parameters shown are typical and are presented in good faith but no warranty is expressed or implied. This edition supersedes all previous issues and all data is subject to change without notice. 11/96