STYLE NA1000M
Compressed Sheet Packing
Aramid Fibers with Wire Mesh
NBR Binder

CONSTRUCTION
Style NA1000M is a compressed non-asbestos sheet gasket material produced from aramid fibers, reinforced with a woven wire mesh and bonded with nitrile rubber (NBR). The sheet is graphited on both sides. Style NA1000M is manufactured through the hot calender process under rigorous quality control standards that are registered under ISO-9001 certification.

APPLICATION / SERVICE
Style NA1000M is a premium service gasket material that is ideally suited for applications with fluctuating pressures and temperatures. It has a broad range of applications in the process industries and in the water and wastewater industry. It is also commonly used in equipment such as pumps and valves. Style NA1000M is suitable for service handling that following general media categories:

 

Mild inorganic acids
Mild organic acids
Concentrated alkalies
Diluted alkalies
Water
Brine
Saturated Steam
Air
Industrial Gases
Animal oils
Synthetic oils
Vegetable oils
Petroleum and Derivatives
General chemicals

 

Aliphatic solvents
Aromatic solvents
Chlorinated solvents
Oxygenated solvents
Neutral solutions
Refrigerants
 
PRODUCT DATA
Temperature Limits:  
Minimum
-40°F (-40°C)
Maximum
720°F (380°C)
Pressure Limits: Vacuum to 1450 psi (100 bar)
ASTM Line Call Out: ASTM F104-F713230-M6
Color: Black
Available Sheet Sizes:  
Thicknesses:
1/32”, 1/16”, 3/32”, 1/8”
Sheet Sizes:
59” x 63”
  59” x 126”

 

TYPICAL PHYSICAL PROPERTIES NA1000M
ASTM
TEST METHOD
PHYSICAL PROPERTIES VALUES
F 36 Compressibility 15%
F 36 Recovery 50%
F 38 Creep Relaxation 37%
F 495 Ignition Loss 32%
F 146 Weight Increase After
Five Hour Immersion
 
ASTM IRM 903
@ +300°F (+150°C)
ASTM Fuel B
@ + 70-85°F (+21-29°C)
14%

11%
F 146 Thickness Increase After
Five Hour Immersion
 
ASTM IRM 903
@ +300°F (+150°C)
ASTM Fuel B
@ + 70-85°F (+21-29°C)
9%

9%
F 152 Tensile Strength Across Grain 2900 psi
(20 N/mm2)
- Density: 137 lb/ft3
(2.2 gm/cc)

 

Pressure x Temperature Sealability Curve

 

The P x T graph shown above indicates the service limits for this sheet considering pressure and temperature simultaneously...(Tests were performed with nitrogen on 1.6mm thick sheet). The "normal" curve represents the common usage area for this sheet while the "maximum" curve indicates the maximum limits. For applications near or above the "maximum" curve, contact TEADIT.
Properties and application parameters shown are typical and are presented in good faith but no warranty is expressed or implied. This edition supersedes all previous issues and all data is subject to change without notice. 11/96

HomeSite TermsOrdering InformationContact UsPlace Order